HERMA rPE white rv (857)
Recycling Polyethylen film white, glossy with corona pretreatment
Technical data
| Grammage | approx. 78 g/m² | ISO 536 |
| Caliper | approx. 80 µm | ISO 534 |
| Tensile stress MD | approx. 18 N/mm² | ISO 527 |
| Tensile stress CD | approx. 16 N/mm² | ISO 527 |
| Opacity | approx. 75 % | ISO 2471 |
Application and use
The glossy surface of HERMA rPE white rv (857) with its corona pretreatment on one side offers an excellent print quality in conventional printing techniques. Before printing we recommend to freshen up the corona pretreatment.
This recycled film contains gel particles. These depend on the quality of the recyclates from the post consumer recyclate (PCR) collection and can thus vary. Depending on the size and shape of the gel particles, there may be variations in ink acceptance. It may therefore be necessary to adjust the printing and die-cutting.
This recycled film is also suitable for thermal transfer printing. Pre-testing is recommended.
HERMA rPE white rv (857) is perfect for the production of optically pretentious, glossy, non-transparent labels. For recycling reasons these labels are preferably used on PE surfaces. The special look of HERMA rPE white rv (857) underlines its recycling design.
Thanks to the high flexibility of this material even curved surfaces may be labelled without any problems.
Composition of HERMA rPE white rv (857)
This recycled film contains approx. 50 % PCR Post Consumer Recycled PE. The outer layers are made of Virgin PE.
Our contribution to the environment
Recycled plastics are used for the production of this film. This reduces the use of new plastic granulate and recycled plastic material is converted into a new product through reuse. This saves valuable resources and supports the trend towards holistic sustainable packaging solutions. Recycled plastics therefore contribute significantly to CO2 rdeuction and thus to climate protection.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
