Adhesive 62L
Permanent, acrylic based adhesive with luminophores
Technical data
| Tack | high | |
| Peel adhesion | very high | |
| Shear | very high | |
| Minimum application temperature | 0 °C | |
| Service temperature | -30 to 120 °C up to 200 °C for short periods - hot fusing |
Application and use
The adhesive 62L is used everywhere, where high transparency with low tendency to creep is wished. The combination of a high tack and a high cohesion, which reduces the adhesive bleed, together with a very good final adhesion characterises the 62L. The luminophores contained in the adhesive achieve a luminescence value of at least 7 on the Laetus scale. This enables the detection and position control of the labels with luminescence sensors. Furthermore the UV-stability is extremely high and wetting on polar surfaces like glass and steel very good. In addition 62L features an extremely good resistance against whitening. Therefore it is predestined for use as No-Label-Look-labels also in printing with UV inks.
The 62L has an excellent resistance to aging, heat, water and light.
Processing
Excellent die-cutting characteristics on all customary machines.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
