Adhesive 62C
Permanent, transparent acrylic based adhesive
Technical data
| Tack | high | |
| Peel adhesion | high | |
| Shear | extremely high | |
| Minimum application temperature | 0 °C | |
| Service temperature | -30 to 80 °C (up to 95 °C for short periods) |
Application and use
The adhesive 62C was specially developed for the use of clear-on-clear applications. Special emphasis should be the extremely good resistance against whitening combined with a high level of transparency. In combination with a filmic face material the products container achieve a high-quality impression and is transparent to see the contents. Once applied the adhesive is insensitive against humidity, soaps and oil and therefore suits especially well for product labelling in food, beverage, hygiene and cosmetic industry. 62C features good resistance to light, heat and aging.
The 62C has a good wettability combined with good adhesion properties. In addition the 62C shows high cohesion together with low tendency to creep, which reduces the adhesive bleed and good final adhesion characteristics occur.
Processing
Excellent die-cutting characteristics on all customary machines.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
Regulations concerning contact with food
The pressure-sensitive adhesive 62C can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry and fatty foodstuffs that can be assigned a correction factor of at least 3 in accordance with Regulation (EU) No. 10/2011. Moreover, the contact with dry, non-fatty foodstuffs is permitted, provided that the ratio of the contact surface of the label related to the toal weight of the food does not exceed 1 dm²//kg (Declaration of no objection valid until 19.02.2027).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
